If you’ve ever dabbled in FDM 3D printing, or reached out to us as a supplier to get parts made, you’ve definitely asked: “What’s the actual printing speed of an FDM printer?” And honestly, it’s one of those questions that doesn’t have a one-word answer—like asking how fast a car is, right? It depends on if you’re talking about a grocery run or a race on a track. As an FDM printing supplier, I get this question all the time from hobbyists, small business owners, and even engineers who’ve dabbled in other 3D printing tech and are curious about our process. Let’s break this down in plain terms, no jargon, no stuffy industry lingo. FDM Printing

First, let’s start with the basics for anyone who might be new to this. FDM stands for Fused Deposition Modeling, and it works by melting thermoplastic filament (PLA, ABS, PETG, TPU—you’ve probably heard of these) and laying down layer after layer of material to build a part. The “speed” here isn’t a single number. Most people new to FDM think it’s just how fast the nozzle moves across the bed, but that’s only a small piece of the puzzle. There’s also layer time, travel speed, acceleration, retraction, and even the type of filament you’re using that changes everything.
Let’s get into the actual numbers people care about. For a typical consumer-level FDM printer, the speed you’d use for a basic, small part is usually between 50mm/s to 150mm/s. Wait, “mm/s” is millimeters per second, for the uninitiated. If you’re printing a simple cube out of PLA, something you might do for a keychain or a test print, you can crank that up to 100–150mm/s no problem. A lot of budget hobby printers top out around that too—they’re not built to push faster without messing up the part. But here’s the thing: those numbers are for the nozzle moving when it’s laying down plastic, not when it’s zipping across the gap between two parts (that’s called travel speed, and that’s way faster—like 200–300mm/s). But that travel speed doesn’t count toward the actual print time because the nozzle isn’t depositing anything.
Now, if you’re a customer coming to us as an FDM supplier for custom parts, we’re not using consumer hobby printers. We’re using industrial-grade FDM printers, and that’s where the speed range widens a lot. For functional parts, prototypes, or end-use production parts, our standard print speed is between 60mm/s and 200mm/s. Wait, why is that different from hobby printers? Industrial machines are built with sturdier frames, better motors, and more precise motion systems so they can move faster without vibrating, skipping steps, or oozing plastic everywhere. If you vibrate too much when printing, your layers don’t line up right, and you get a wobbly, weak part—so speed is a balance between how fast you can go and how good the final part is.
But hold on, that’s not the end of the story. There are a ton of factors that tweak that speed number up or down, and I’d be lying if I said we just set it and forget it every time. Let’s talk about layer height first. If you print with a thicker layer (like 0.3mm), you can go faster because you’re laying down more plastic per layer, so you don’t have to move the nozzle as much. If you use a thinner layer (0.1mm or 0.15mm) for a smoother surface finish, you have to slow down a bit—because each layer is smaller, you’re moving the nozzle more times, and too much speed on thin layers makes them look jagged or uneven. That’s a big one for people who want parts that look polished, not like a messy stack of plastic.
Then there’s the part size and complexity. A small, simple bracket? We can print that at 180mm/s no problem. A giant, intricate part with lots of overhangs, small holes, or complex geometry? We have to dial that back to 80–120mm/s, easy. Overhangs are tricky because if you move too fast, the plastic that’s supposed to support the next layer droops or doesn’t stick right. Same with small details—like a tiny logo or a thin wall—you can’t rush that, or it’ll get squished or disappear. As a supplier, we adjust this for every single custom order we get, because no two parts are the same. We don’t just load up a preset and hit print—we tweak speeds, temperatures, retraction, all that, to make sure the part comes out exactly how the customer wants it.
Filament type is another huge factor. PLA is the easiest to print fast, right? It melts at a lower temp, flows nicely, and doesn’t warp much, so we can run it up to 180mm/s without issues. ABS is trickier—it needs a heated bed and chamber, and it can string a lot if you move too fast, so we usually stick to 100–150mm/s. PETG is middle of the road, pretty forgiving, so 120–160mm/s works great. TPU, that flexible stuff? We have to slow that way down—like 40–80mm/s. If you run TPU fast, the filament gets stretched or not pulled into the nozzle properly, and you get gaps or inconsistencies. We see this all the time, especially with people who want custom phone cases or gaskets made of flexible TPU—they ask why we can’t print it as fast as PLA, and we have to explain that the material is the limiting factor, not the printer.
Acceleration and jerk are two more terms that people always ask about, so I’ll keep it simple. Acceleration is how fast the printer gets up to speed when it changes direction (like when it’s moving from one line to the next of a layer). Jerk is how much the printer can speed up or slow down suddenly without messing up. If you set acceleration too high, the printer lurches, vibrates, and ruins the part. Most of our industrial printers have acceleration settings between 1000mm/s² and 5000mm/s², depending on the part. For fast, simple parts, higher acceleration works—for detailed parts, we drop it way lower to keep movement smooth.
Wait, let’s also talk about common myths. A lot of people think faster is always better—like, “Why not crank the speed to 300mm/s and get parts done in half the time?” But that’s a bad call, almost always. Faster speed doesn’t just mess up the part’s look—it hurts its strength. When you move the nozzle too fast, the plastic doesn’t have time to cool and bond with the layer below it. So your part is weaker, it might snap easily, or even come apart during post-processing. We had a customer once who tried printing a custom bracket for his garage shelf at 250mm/s to save time, and it broke under the weight of a few toolboxes. We reprinted it at 120mm/s, and it’s still holding up a year later. That’s the tradeoff—speed vs. quality vs. strength.
As a supplier, we also have to factor in print time costs. If we’re printing a part for a customer, we can’t just run it as fast as possible to get it out the door if it means the part is defective. But we also don’t want to drag our feet so much that the price is way too high. We balance all these factors: part complexity, filament type, required strength, surface finish, and the customer’s deadline. For example, if a customer needs a prototype in 2 days, we might push the speed a little higher than usual (but not too much) to meet that deadline. If they need a functional end-use part that has to pass a load test, we slow down a bit to make sure it’s strong enough.
Let’s put this into real examples so it makes sense. Last month, we had an order for 50 small PLA keychains with a company’s logo on them. Those were simple, small, no overhangs, just thin walls. We printed them at 140mm/s, layer height 0.2mm, and they came out perfect, no jagged edges, no missing logos, done in 2 days instead of 4. Then we had an order for a custom medical prototype part, which had tiny channels and tight tolerances. We had to print that at 80mm/s, layer height 0.15mm, because the tolerances were so precise that any extra speed would make the part off by a few tenths of a millimeter, which wouldn’t work for their testing. That one took a week, but it was exactly what they needed. And just last week, a customer wanted a flexible TPU gasket for a machine, so we printed that at 60mm/s, which is the sweet spot for TPU, no gaps, flexible, fits perfectly.
Another thing people don’t talk about: travel speed vs. actual printing speed. I mentioned this earlier, but it’s worth repeating. The total print time includes time when the nozzle is laying plastic and time when it’s moving between lines or parts. Travel speed is way faster (200–350mm/s) and doesn’t count toward the “print speed” number people care about, because nothing is being deposited. So when someone asks, “What’s the printing speed?” they almost always mean the speed when plastic is being laid down, not the random fast moves between parts.
If you’re new to FDM printing, whether for personal use or for a business, it’s easy to fixate on speed. You see social media posts of people printing a whole chair in an hour, and you think, “Wow, why can’t I do that?” But that’s a special case—large, simple parts, industrial printers, optimized settings, maybe even a larger nozzle (like 1.0mm vs. the standard 0.4mm). A larger nozzle lays down more plastic per line, so you can move faster, which cuts down print time. Smaller nozzles (0.2mm, 0.3mm) for fine details mean slower speeds, because each line is smaller. That’s another factor we adjust for at our shop—nozzle size changes the whole speed dynamic.
Wait, what about customer questions? We get a lot of people who say, “I saw on Amazon that this printer prints at 500mm/s—can you match that?” First, those are almost always consumer hobby printers, and that 500mm/s is probably travel speed, not actual print speed. Even if it is print speed, that’s for a super simple, low-detail part, and the final part won’t be strong or good looking. As a supplier, we’re not in the business of cutting corners to print fast—our customers come to us for reliable, high-quality parts that work, not just parts that get done yesterday.
Let’s also touch on post-processing, because that ties into speed too. If you print at a slightly slower speed, your layers bond better, so you can sand, paint, or glue the part easier. If you print too fast, the layers are more distinct, so sanding takes longer, or paint doesn’t stick as well. That’s another cost we have to factor in for our customers—faster print speed might save time on the printer, but it might add time and cost to finishing the part.
At the end of the day, there’s no magic number for FDM printing speed. It’s a balance between what you need the part to do, what material you’re using, how much detail you want, and how much time you have. As an FDM printing supplier, our job is to figure that balance out for every customer, instead of just pushing a generic number that works for one part but not another.

If you’re thinking about getting custom FDM parts made, or you want to chat about what speed makes sense for your project, reach out to our team to connect and discuss your needs. We can walk through every detail, answer any questions, and make sure you get a part that’s exactly right for your use case. Don’t hesitate to get in touch to start the conversation.
SLS Printing References
- Gibson, I., Rosen, D. W., & Stucker, B. (2015). Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing. Springer.
- Campbell, T. A., & Kietzman, J. W. (2017). Functional 3D Printing: Basics, Applications and Requirements. CRC Press.
- League for Industrial Robotics (LIR). (2022). FDM 3D Printing Parameter Optimization for Strength and Speed. Industrial Additive Manufacturing Report.
- ASTM International. (2020). Standard Guide for Evaluating Mechanical Properties of Fused Deposition Modeling (FDM) Parts. ASTM F2924-14.
Dongguan Xinchuan Precision Manufacturing Co., Ltd.
As one of the most professional fdm printing manufacturers and suppliers in China, we offer a quick lead time for customized orders. Please feel free to buy precision fdm printing made in China here from our factory. Contact us for quotation.
Address: #16 Gangjian Road, Changping Town, Dongguan City, Guangdong, China. 523000
E-mail: FreeQuote@xcprecision.com
WebSite: https://www.xcprecisions.com/