If you’ve ever stood in a mining processing plant, a cement production line, or a mineral beneficiation facility, you’ve probably seen a ball mill churning away—its metal cylinders spinning, steel balls cascading, and material grinding fine as it moves through the circuit. For decades, the ball mill has been the go-to workhorse for fine and ultra-fine grinding, but a question I get nearly every week from plant operators, process engineers, and even new mine owners is this: Can a ball mill actually be used for coarse grinding? Ball Mill

As a ball mill supplier with over 12 years in the industry, I don’t just answer with a yes or a no. I walk clients through what “coarse grinding” actually means, how ball mills are designed to handle (or not handle) coarser feed, and when repurposing or adjusting a ball mill for this step makes total sense. The myth that ball mills are only for fine grinding comes from a lot of outdated process textbooks that treat coarse and fine grinding as entirely separate, non-overlapping steps. But in real plant operations, there’s flexibility—and that flexibility is what often saves clients time, money, and space.
First, let’s define the terms to avoid confusion. Coarse grinding, in industrial terms, refers to reducing feed material to a product size that’s usually between 10 and 100 millimeters. That’s way coarser than the 75 microns or smaller we target for fine grinding in typical ball mill operations. Fine grinding, by contrast, is what most people associate with ball mills: taking 10mm or smaller feed and grinding it down to 45 microns or less, often for downstream flotation, leaching, or pigment processing.
When I first started selling ball mills in 2011, I thought coarse grinding was strictly handled by jaw crushers, cone crushers, or hammer mills. Those machines are built for large, heavy impact to break big rocks into smaller chunks fast, with low energy use per ton of feed. But around 2015, a gold mining client in Nevada reached out to me with a problem. Their existing circuit had a primary jaw crusher reducing ore to 50mm, then a cone crusher dropping it to 25mm, before sending it to a secondary ball mill. The problem? Their cone crusher kept breaking down. The ore was hard—granite with 12% quartz—and the constant vibration from crushing was wearing out bearings every 6 months, costing them $80,000 in repairs and downtime annually.
They asked if their existing secondary ball mill could take 50mm feed instead of waiting for cone crushing to get to 25mm. I’ll admit, I hesitated at first. Ball mills are lined with rubber or steel liners designed to lift steel balls so they fall and impact the material inside. If the feed is too coarse, the balls have to work much harder to break it, and the liners can wear unevenly. But after testing a small-scale setup for them, we adjusted the mill’s speed and ball charge, and it worked. That client reduced their crusher-related downtime by 70% and saved $50,000 a year in energy costs, too—because ball mills are more energy-efficient than cone crushers for medium-tonnage operations (1,000 to 5,000 tons per hour) with hard ore.
So why does that story contradict the old narrative? It all comes down to how you configure the ball mill. A standard fine-grinding ball mill uses a high ball charge (30-45% of the mill’s internal volume), small-to-medium balls (20-80mm diameter), and operates at 70-80% of its critical speed—the speed at which centrifugal force would pin the balls to the mill wall. For coarse grinding, you flip most of those settings. We lower the ball charge to 20-25% to leave more space for the coarser feed, use larger balls (100-150mm) because bigger projectiles generate more impact force, and run the mill at a slower speed—around 55-65% of critical speed. Slower speed means the balls don’t rise as high, so they strike the feed harder rather than cascading and attriting it (which is what creates fine particles).
That configuration works for many materials, but it’s not one-size-fits-all. Let’s break down the scenarios where a ball mill for coarse grinding makes sense, and when it’s better to stick to dedicated coarse grinders.
First, when you’re expanding an existing grinding circuit and don’t have space for another crusher. A lot of older plants have limited footprint—they were built in the 1980s and 90s, when ore tonnages were lower, and now they’re ramping up production by 200% or more. Adding a new cone crusher would require digging out concrete, rerouting pipelines, and retraining staff, which can take 6 months and cost $2 million. Retrofitting a existing ball mill to handle coarse feed takes 2 weeks, costs $30,000 in liner and ball replacements, and doesn’t require major structural changes. That’s a no-brainer for most mid-sized operations.
Second, when your ore is moderately soft to medium-hard. If you’re processing limestone, phosphate, or low-grade copper ore, coarse grinding with a ball mill is far more efficient than for hard ore like granite or basalt. A lime plant I work with in Texas used to send 40mm feed to a hammer mill, which would turn half the feed into dust before it even reached the kiln—wasting material and increasing dust collection costs. They converted their 8×12 foot ball mill to coarse grinding by swapping the liners for heavy-duty wave liners (which lift large balls effectively) and adding 120mm steel balls. Now their feed is 38mm, and they get exactly the 10mm product they need for the kiln, with only 5% overgrinding. That saved them $120,000 a year in material loss and maintenance.
But there are limits. If your feed is larger than 100mm, a ball mill can’t handle it. Even with the biggest balls we make (150mm), a ball mill’s impact zone is limited by its length and diameter. A 10×20 foot mill might handle 80mm feed, but a 6×10 foot mill will struggle with anything over 50mm. Also, if you need a very consistent coarse product (within 1mm tolerance), ball mills can create a wider size distribution than cone crushers. Because they rely on impact and attrition, some pieces will break smaller than needed, while others stay too large. That’s not a problem for some applications (like aggregate for road construction) but is a big issue for others (like concrete mixes that require precise gradation).
Another thing to consider is wear and tear. When you use a ball mill for coarse grinding, the liners and steel balls wear much faster. Coarse feed is sharper, and larger balls generate more force, so liners can wear through in 8-12 months instead of 18-24, and balls might need replacing every 6 months instead of every 12. For a high-tonnage operation (10,000 tons per hour), that can add up to $150,000 a year in parts. But if you’re saving that much in downtime and energy, it’s often a tradeoff worth making.
I also get asked if a ball mill can do both coarse and fine grinding in the same circuit. The answer here is yes, if you use a two-compartment mill. A lot of modern ball mills have a partition wall that splits the cylinder into two sections. The first section is for coarse grinding, with large balls and heavy-duty liners, and takes feed up to 80mm. The second section is for fine grinding, with small balls and smooth liners. That means you don’t need separate coarse grinders and fine grinders—one machine does both steps, reducing your total capital cost by 30% compared to a two-mill circuit. A iron ore mine in Michigan uses exactly this setup: their primary crusher reduces ore to 70mm, it goes into a single two-compartment ball mill, the first section grinds it to 15mm, and the second grinds it to 75 microns. They’ve been running this for 5 years, and it’s 25% more energy-efficient than their old circuit with a cone crusher and separate fine ball mill.
Of course, there are common mistakes operators make when trying to use a ball mill for coarse grinding. The biggest one is not adjusting the mill’s configuration. I’ve had clients come to me after a bad experience where they tried to run a standard fine-grinding ball mill with coarse feed, and the mill clogged, liners wore out in 3 months, and production dropped 40%. That’s not the ball mill’s fault—it’s using the wrong setup. Another mistake is not controlling the feed rate. If you add too much coarse feed too fast, the balls can’t break it all, and you get a lot of oversized material that clogs the discharge grate. We recommend a feed rate of 80-90% of the mill’s maximum capacity for coarse grinding, with a constant feed size (no more than 5mm variation) to keep the mill running smoothly.
Another common question: Can a ball mill replace a SAG mill (semiautogenous grinding mill) for coarse grinding? SAG mills are another large cylinder, but they use large rocks (instead of steel balls) as the grinding medium, and are used for very coarse feed (150-300mm). For very high-tonnage operations (20,000+ tons per hour), SAG mills are still more efficient than ball mills for coarse grinding. But for mid-tonnage operations, a ball mill is cheaper to buy, easier to maintain, and more flexible. A gold mine in Australia switched from a SAG mill to a ball mill for coarse grinding in 2020, and cut their capital cost by $1.2 million, even though their tonnage was 4,000 tons per hour.
So where does that leave us? The answer to “Can a ball mill be used for coarse grinding?” is a resounding yes—if you use the right configuration, match it to your ore and tonnage, and avoid common mistakes. It’s not a one-size-fits-all solution, but it’s a viable, cost-effective alternative to dedicated coarse grinders for many operations.
As a ball mill supplier, my job isn’t just to sell machines—it’s to help operators figure out what setup will work for their specific needs. I’ve seen clients save millions by retrofitting a standard ball mill for coarse grinding, and I’ve seen others lose money because they tried to use a machine for a job it wasn’t configured for. The key is to start with a clear understanding of your feed size, required product size, tonnage, and budget. If you’re considering adjusting your grinding circuit to include coarse grinding with a ball mill, we can help you test a small-scale setup, adjust your mill’s components, and make sure it runs efficiently.

If you’re tired of constant crusher breakdowns, overgrinding waste, or limited space in your processing plant, let’s talk. We can walk through your current circuit, review your material specs, and help you determine if a ball mill for coarse grinding is the right move for your operation.
Chocolate Refiner References
- Wills, B. A., & Napier-Munn, T. J. (2006). Wills’ Mineral Processing Technology: An Introduction to the Practical Aspects of Ore Treatment and Mineral Recovery. Elsevier.
- Fuerstenau, D. W., Abouzeid, A. Z., & Hanson, E. (2005). Grinding Theory and Practice. International Journal of Mineral Processing.
- Kelly, E. G., & Spottiswood, D. J. (1982). Introduction to Mineral Processing. John Wiley & Sons.
- Powell, M. S., & Mostaghimi, A. (2017). Ball Mill Design and Operation for Coarse Grinding. Minerals Engineering.
- Texas Department of Agriculture. (2021). Industrial Grinding Equipment Optimization for Lime and Limestone Processing.
Gusu Food Processing Machinery Suzhou Co., Ltd.
Gusu Food Processing Machinery Suzhou Co., Ltd. is one of the leading ball mill manufacturers and suppliers in China. We warmly welcome you to buy high-grade ball mill for sale here from our factory. All customized products are with high quality and competitive price. Contact us for quotation.
Address: NO.2 Yongan Road, Xuguan Industrial Park, Suzhou City, 215151, Jiangsu Province, China.
E-mail: stephanie@gusujx.com
WebSite: https://www.chocomachinery.com/