{"id":3902,"date":"2026-11-22T04:58:21","date_gmt":"2026-11-21T20:58:21","guid":{"rendered":"http:\/\/www.dragobarzini.com\/blog\/?p=3902"},"modified":"2026-11-22T04:58:21","modified_gmt":"2026-11-21T20:58:21","slug":"how-to-increase-internal-circulation-in-ic-tank-49ae-db109c","status":"publish","type":"post","link":"http:\/\/www.dragobarzini.com\/blog\/2026\/11\/22\/how-to-increase-internal-circulation-in-ic-tank-49ae-db109c\/","title":{"rendered":"How to increase internal circulation in IC tank?"},"content":{"rendered":"<p>If you\u2019re running an industrial wastewater treatment plant (WWTP) that uses an IC anaerobic tank, odds are you\u2019ve run into that annoying slump in performance: sluggish biogas production, inconsistent sludge mixing, and tank volumes that feel like they\u2019re doing half the work they should. As a supplier who\u2019s worked with dozens of plants on tuning their IC tanks, I get it\u2014internal circulation isn\u2019t just a \u201cnice-to-have\u201d feature, it\u2019s the backbone of how these tanks break down organic matter, keep bacteria happy, and avoid costly process hiccups. Let\u2019s cut to the chase and break down what actually moves the needle when you\u2019re looking to boost that circulation\u2014no stuffy jargon, just real lessons from the field. <a href=\"https:\/\/www.gbwwt.com\/ic-anaerobic-tank\/\">IC Anaerobic Tank<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.gbwwt.com\/uploads\/47009\/small\/biogas-water-seal-tank63a9f.jpg\"><\/p>\n<p>First, let\u2019s do a quick recap for anyone who might be new to IC systems, because if you don\u2019t grasp the basics, you can\u2019t fix the gaps. The IC (Internal Circulation) anaerobic tank works on a clever loop: biogas produced in the lower, high-loading zone lifts a mix of wastewater, sludge, and gas up through a central riser pipe. That mix then splits at the top\u2014biogas gets captured for energy, and the rest gets recycled back to the bottom of the tank to mix with incoming raw wastewater. That recycle is your internal circulation; weak it, and you get dead zones where sludge settles, bacteria go dormant, and organic loading rates drop.<\/p>\n<p>I\u2019ve seen plants where circulation is off by 10% and they\u2019re only hitting 60% of their biogas output. It\u2019s not rocket science, but it does require checking a few key parts first. Let\u2019s start with the one people usually overlook: the riser pipe and gas separator efficiency.<\/p>\n<p>A lot of older IC tanks have riser pipes that are either too narrow, or the gas separator at the top is caked with old sludge and biofilm. Think about it: the whole circulation loop depends on that biogas lift creating enough pressure to pull the mixed liquor up. If the separator is clogged, it can\u2019t strip all the gas out of that rising mix before it recycles, so you end up with air bubbles in the return line that disrupt the flow. I worked with a food processing plant a few months back\u2014their circulation rate had dropped 25% because their separator was 80% covered with thick, rotting sludge. A 2-hour high-pressure clean on the separator, and a swap of their original 100mm riser for a 125mm pipe (they could fit it without a full tank tear-out) boosted circulation by 20% almost overnight. Pro tip: Don\u2019t just clean the separator once a year\u2014add a quarterly visual check to your maintenance list. If you see thick, crusty buildup, clean it before it starts choking your flow.<\/p>\n<p>Next up, the recirculation pump. Wait, I know, pumps seem obvious, but so many plants either use the wrong pump or let their existing one wear out to the point it\u2019s not pushing enough flow. Here\u2019s the thing: IC tank internal circulation isn\u2019t just about flow rate\u2014it\u2019s about consistent flow. A lot of operators size their recirc pump for peak incoming load, but if the load drops, they leave the pump running at full throttle, which causes cavitation. Cavitation creates those tiny air bubbles I mentioned earlier, which erode pump impellers over time and mess with the suction head needed for the lift. I\u2019ve seen pumps that were only 5 years old have impellers worn down so much they were pushing 30% less flow. A quick pump audit\u2014checking impeller condition, suction pressure, and flow rate against your design specs\u2014can save you a lot of hassle. Also, consider variable frequency drives (VFDs) if you don\u2019t have them already. VFDs let you adjust pump speed to match your incoming wastewater load, so you\u2019re not wasting energy or straining the system. One of my customers in the brewery space switched to VFDs and saw their circulation stability jump 15% while cutting their pump energy use by 22%\u2014win-win.<\/p>\n<p>Then there\u2019s the incoming wastewater distribution system, and this is where dead zones start to form. The IC tank\u2019s bottom zone is where all the action happens\u2014anaerobic bacteria feast on incoming organics, but if that incoming water is just dumping in one or two spots, you\u2019re only mixing a small area. The rest of the tank is stagnant, sludge settles, and circulation can\u2019t pull from those dead spots. I recently worked with a municipal WWTP that had their influent line plumbed into a single 6-inch pipe at the bottom. We added a modular distribution manifold (not a big, expensive retrofit) with 12 evenly spaced outlets, and within 3 weeks, their circulation rate climbed 18%. Why? Because now every corner of the lower zone is getting fresh wastewater, so the biogas production is uniform across the tank, which means the lift is consistent throughout the riser. Side note: If your tank has a multi-stage design (like some of the larger IC systems do), make sure each stage\u2019s distribution is separate. Don\u2019t mix the effluent from the top stage into the incoming feed for the bottom stage\u2014 that disrupts the density gradient that drives circulation.<\/p>\n<p>Don\u2019t sleep on sludge inventory management either. Over time, excess anaerobic sludge builds up in the tank, right? And too much sludge can act like a blanket, slowing down the rising mix in the riser and blocking the return flow. I had a customer in the textile industry that was wasting sludge only once a year, and their MLSS (mixed liquor suspended solids) were at 18 g\/L\u2014way too high for optimal circulation. We adjusted their wasting schedule to pull 5-10% of excess sludge every week, and within 2 months, MLSS dropped to 12 g\/L, and circulation improved 12%. The sweet spot for IC tanks is usually 8-15 g\/L MLSS, but that can shift a bit depending on your organic load. Just keep an eye on it\u2014if your sludge is thick and compact, it\u2019s probably holding your system back.<\/p>\n<p>Now, a few common myths I hear all the time, to clear the air. First myth: \u201cBigger riser pipes = more circulation.\u201d Not necessarily. If your separator is clogged, a bigger riser might just move more of that messy, gas-filled mix, but you\u2019ll still get poor separation at the top. It\u2019s a chain\u2014all links have to be strong. Second myth: \u201cCirculation rate doesn\u2019t matter as long as biogas is being produced.\u201d No, biogas is a result of good circulation, not the other way around. If you\u2019re only making 0.5 m\u00b3 of biogas per kg of COD (chemical oxygen demand), that\u2019s a sign your circulation is too low\u2014good IC tanks hit 0.6-0.8 m\u00b3\/kg. Third myth: I can just blast the recirc pump to fix it. Over-pumping can cause the riser mix to rise too fast, which doesn\u2019t give the gas separator enough time to strip biogas, so you\u2019re recirculating too much gas instead of mixed liquor. That leads to less effective mixing in the bottom zone, which actually lowers biogas production.<\/p>\n<p>Last, let\u2019s talk about when you might need a little extra help from the supplier side. If you\u2019ve checked all these boxes, tuned your maintenance, and adjusted your load, but circulation is still off, it might be a design tweak specific to your tank. A lot of older IC tanks were built with smaller risers or undersized separators that can\u2019t handle the higher loads plants are dealing with now (thanks to tighter wastewater regulations). We work with plants to do tank retrofits that don\u2019t require full replacement\u2014modular riser extensions, upgraded gas separators, and distribution manifold retrofits that fit into existing tanks without major construction. I\u2019ve had customers go from barely hitting 50% circulation to 90% with these targeted tweaks, and it\u2019s saved them hundreds of thousands of dollars compared to buying a new tank.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.gbwwt.com\/uploads\/47009\/small\/poly-aluminum-chloride-pac-e72f6.jpg\"><\/p>\n<p>At the end of the day, boosting internal circulation in your IC tank is all about matching the flow to your actual operation, not just what the design specs say. It\u2019s regular checks, small adjustments, and not ignoring the small parts that make the loop work. If you\u2019re troubleshooting and not sure where to start, don\u2019t guess\u2014reach out. Whether you\u2019re looking for a maintenance tune-up, a retrofit, or just someone to walk through your current system, we\u2019re here to help you get the most out of your IC tank.<\/p>\n<p><a href=\"https:\/\/www.gbwwt.com\/mbr-curtain-membrane\/\">MBR Curtain Membrane<\/a> References:<\/p>\n<ol>\n<li>Metcalf &amp; Eddy. (2014). Wastewater Engineering: Treatment and Reuse, 5th Edition. McGraw-Hill Education.<\/li>\n<li>Tchobanoglous, G., Burton, F. L., &amp; Stensel, H. D. (2003). Anaerobic Treatment Processes. In Wastewater Engineering: Treatment, Disposal, and Reuse (4th ed.). McGraw-Hill.<\/li>\n<li>Environmental Protection Agency (EPA). (2004). Anaerobic Tank Design and Operation for Industrial Wastewater. EPA Office of Water.<\/li>\n<li>International Water Association (IWA). (2019). Internal Circulation (IC) Reactors: Principles, Design and Operation. IWA Publishing.<\/li>\n<li>Water Environment Federation (WEF). (2018). Operation of Anaerobic Treatment Systems. WEF Press.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.gbwwt.com\/\">Jinan Guangbo Environmental Protection Technology Co., Ltd.<\/a><br \/>We&#8217;re well-known as one of the leading ic anaerobic tank manufacturers and suppliers in China. With a professional production team, we are able to meet the needs of the majority of our customers. Please feel free to buy high quality ic anaerobic tank from our factory.<br \/>Address: No.102, Commercial and Residential Building, 18th Floor, Tangye Academician Valley, Tangye Sub-district, Licheng District, Jinan City<br \/>E-mail: info@gbwwt.com<br \/>WebSite: <a href=\"https:\/\/www.gbwwt.com\/\">https:\/\/www.gbwwt.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019re running an industrial wastewater treatment plant (WWTP) that uses an IC anaerobic tank, odds &hellip; <a title=\"How to increase internal circulation in IC tank?\" class=\"hm-read-more\" href=\"http:\/\/www.dragobarzini.com\/blog\/2026\/11\/22\/how-to-increase-internal-circulation-in-ic-tank-49ae-db109c\/\"><span class=\"screen-reader-text\">How to increase internal circulation in IC tank?<\/span>Read more<\/a><\/p>\n","protected":false},"author":979,"featured_media":3902,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3865],"class_list":["post-3902","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-ic-anaerobic-tank-4984-dbf675"],"_links":{"self":[{"href":"http:\/\/www.dragobarzini.com\/blog\/wp-json\/wp\/v2\/posts\/3902","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.dragobarzini.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.dragobarzini.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.dragobarzini.com\/blog\/wp-json\/wp\/v2\/users\/979"}],"replies":[{"embeddable":true,"href":"http:\/\/www.dragobarzini.com\/blog\/wp-json\/wp\/v2\/comments?post=3902"}],"version-history":[{"count":0,"href":"http:\/\/www.dragobarzini.com\/blog\/wp-json\/wp\/v2\/posts\/3902\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.dragobarzini.com\/blog\/wp-json\/wp\/v2\/posts\/3902"}],"wp:attachment":[{"href":"http:\/\/www.dragobarzini.com\/blog\/wp-json\/wp\/v2\/media?parent=3902"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.dragobarzini.com\/blog\/wp-json\/wp\/v2\/categories?post=3902"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.dragobarzini.com\/blog\/wp-json\/wp\/v2\/tags?post=3902"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}